Which paint for a bathroom? Latex, ceramic, lime or tadelakt
Share
A bathroom needs paint that copes with moisture and cleaning. Most people choose latex or ceramic paint labelled “for kitchens and bathrooms” with a high wet-scrub resistance class (class 1 or 2 under EN 13300). If you prefer a vapour-permeable wall without plastics, lime paint is a good choice — but only outside the zone directly hit by water. Paint is not suitable for the shower or the wall above the bath: those need tiles or tadelakt.
Wet zone and damp zone — start here
A bathroom is not uniform. Before choosing paint, divide the walls into two parts:
- Wet zone — the shower, the wall above the bath, around the taps. Water runs directly onto the wall here. No wall paint can replace a proper finish: tiles or a waterproof finish such as tadelakt are used.
- Damp zone — the remaining walls and the ceiling. Water does not run here, but there is steam, condensation and frequent cleaning. This is the part you paint.
The second thing is ventilation. If steam has nowhere to go, it will condense on the wall whatever the paint. No paint replaces a working extractor and airing — more about this in our article on mould on walls.
What to look for on the paint label
Wet-scrub resistance class
The EN 13300 standard divides paints into five classes according to how much coating is lost during wet scrubbing (tested to ISO 11998):
| Class | Coating loss | What it means in practice |
|---|---|---|
| 1 | below 5 µm after 200 cycles | highest resistance, can be cleaned often |
| 2 | 5–20 µm after 200 cycles | good resistance to cleaning |
| 3 | 20–70 µm after 200 cycles | washable, but carefully |
| 4 | below 70 µm after 40 cycles | low resistance, not for frequent cleaning |
| 5 | 70 µm or more after 40 cycles | practically not washable |
For a bathroom where walls are cleaned regularly, choose class 1 or 2 paints. You will find the class in the product's technical data sheet, not always on the front of the tin.
Sheen level
The more binder in the paint, the harder the coating and the better it withstands scrubbing, but the harder it is to get a deep matt. That is why many bathroom paints have a satin finish. Matt hides wall imperfections better; satin is easier to clean.
Time to full resistance
Paint dries within a few hours, but many paints only reach full washability after 14 or even 28 days. Do not scrub freshly painted walls during that time.
Types of bathroom paint — compared
| Paint | What it is | Cleaning | When to choose it |
|---|---|---|---|
| Latex | water-based, acrylic resins | good, depends on class | an all-round choice for the damp zone |
| Ceramic | latex with ceramic components, forms a water-repellent coating | very good, withstands detergents | walls that get dirty and cleaned often |
| Acrylic (standard) | water-based, acrylic | usually weaker | more for living rooms than bathrooms; check the class |
| Lime | mineral, with lime as the binder | weaker than latex | when you want vapour permeability and a natural composition; only outside the zone hit by water |
| Tile paint | acrylic or epoxy, special purpose | depends on the product | when you want to repaint old tiles |
The name of a paint says little about its properties. “Ceramic” or “bathroom” are trade names — always check the scrub resistance class and intended use in the technical data sheet.
Lime paint in a bathroom — when it makes sense
Lime paint works differently from latex. It does not form a sealed film; it bonds with the substrate and hardens like stone over time. The wall stays vapour-permeable, and the high pH of fresh lime (above 12) inhibits mould. That is why lime has been used for centuries in damp places such as cellars and pantries.
Lime paint works in a bathroom if:
- you are painting walls and the ceiling outside the zone where water runs directly;
- the bathroom has working ventilation or a window;
- the substrate is mineral (lime or cement-lime render, concrete) or prepared for lime;
- you like a matt, living finish that latex paint cannot give.
To be fair about the limits: lime paint withstands scrubbing less well than latex, and it will not bind over old latex paint without preparing the substrate. If the wall by the basin is splashed and scrubbed every day, consider tiles or tadelakt there.
Our Muro Sano paint (min. 35% lime, based on a fine lime fraction and marble) is designed for interiors and exteriors, including damp rooms: bathrooms, kitchens, laundries and cellars. All our lime paints are in the lime paint collection.
Shower and the wall above the bath: tadelakt instead of paint
In the wet zone, instead of tiles you can use tadelakt — a Moroccan technique for finishing lime plaster. The surface is compacted, polished with a stone and saturated with soap, which combines with the lime into a water-repellent layer. The result is a seamless wall without grout lines that lets water vapour through. Tadelakt is applied in at least three coats of 2–3 mm; it is a technique that takes skill. Details: tadelakt — a bathroom without tiles and how much tadelakt costs in a bathroom.
How much paint for a bathroom?
Wall paint manufacturers usually state a coverage of 8 to 16 m² per litre per coat on a smooth, primed substrate. Lime paint is calculated in kilograms: 1 kg of Muro Sano covers approximately 4–5 m² in one coat on a smooth wall and 1.5–2 m² on coarse-grained plaster (3–5 mm). In both cases plan for two coats.
Frequently asked questions
Is latex paint suitable for a bathroom?
Yes, it is the most common choice for bathrooms. Choose a paint labelled for kitchens and bathrooms with wet-scrub resistance class 1 or 2 under EN 13300.
Can you paint a bathroom with lime paint?
Yes, the walls and ceiling outside the zone directly hit by water. Lime paint lets water vapour through and, thanks to its high pH, inhibits mould, but it withstands scrubbing less well than latex.
Which paint for a bathroom without a window?
Working mechanical ventilation is what matters most, because no paint removes moisture from the air. Choose a paint with a high scrub resistance class and check that the vent really draws air.
How long does paint take to dry in a bathroom?
The surface dries in 1 to 24 hours depending on the paint, but many paints reach full washability after 14–28 days. Lime paint is applied in coats every 4–6 hours, and it takes several days to two weeks or so to cure fully.
What can you paint bathroom tiles with?
There are special tile paints, acrylic or epoxy. Check the technical data sheet to see whether a product can be used in the shower zone and on floors, as not all are suitable.
Have a question about your bathroom? Call +48 605 642 777. Our advice is free.