Skip to product information
1 of 4

Decoraton

Tadelakt – lime plaster

Regular price 820,00 zł
Regular price Sale price 820,00 zł
Sale Sold out
Taxes included. Shipping calculated at checkout.
Made to order — ships within 14 working daysCreated especially for you. Every batch is prepared after the order is placed — fresh, not off the shelf.
Packaging

Tadelakt is the oldest alternative to bathroom tiles known to mankind — a lime plaster finishing technique originating from Morocco. It relies on an exceptionally high ratio of lime to aggregate.

Although it does not let water through, it does let air and water vapour through — it is both hydrophobic and diffusion-open. Walls breathe, and moisture has no chance to condense and cause mould.

Used in bathrooms, showers, fountains and pools for thousands of years — without any chemicals. It was originally also used as a lining in drinking water cisterns; the lime disinfected the water supply at the same time.

On which surface

Tadelakt contains no modern chemicals, so it reacts only with surfaces containing lime, clay, cement or ceramics. Bonding primers and other inventions will not help here. Plasterboard requires appropriate prior treatment.

How to prepare the wall

Wet the surface and keep wetting it until the water stops being absorbed. This is a must, not a recommendation. The easiest way is with a garden hose with a mist setting.

How to apply

The first coat is applied with a sponge or sponge float — thinly, covering the whole surface. Then you wait for the wall to absorb the moisture; depending on the surface, this may take minutes or hours. Always start with the areas that dry first.

  • Thickness of a single coat: 2–3 mm
  • Number of coats: at least three

On the last coat, you smooth the surface with a trowel, filling micro-cracks. When the aggregate is pressed in with a steel trowel, a lime-rich cream comes out — you use it to repair small defects. This is a time-sensitive moment: too early and you spread the mix unevenly, too late and you scratch it.

Polishing and soap

The surface is compacted by polishing with a stone, with the first coat of soap. You leave the wall overnight, and the next day you continue applying soap and polish again — until glossy.

We make Decoraton soap from olive oil and potassium hydroxide. The stearic acid it contains binds with the lime, forming a layer of lime soap with strong hydrophobic properties. Over the following few days it is worth rubbing in a thin layer of soap by hand or with a brush.

How much you need

In the wet zone — in the shower, in the bathroom, wherever water runs — tadelakt is applied in the full layer system. Consumption is then about 4.5–5 kg per m², so a 20 kg pack is enough for roughly 4–4.5 m².

This is a range, not a guarantee — actual consumption depends on the absorbency of the surface and the technique. For larger areas, give us a call and we will work it out together.

Is it a technique for beginners?

No. Tadelakt requires knowledge of the process, a feel for the material and experience. Start with a small area, find a mentor or take a training course. Questions: +48 605 642 777 — we advise free of charge.

Delivery and returns

Every batch is prepared after the order is placed, so we ship within 14 working days. We send orders via InPost parcel locker or courier — you pick the method in the cart and see the cost before payment.

You have 14 days to withdraw from the contract without giving a reason (product unused, in its original packaging). The VAT invoice will be issued to the details given with the order.

How to apply

Wet the surface until the water stops being absorbed. Tadelakt bonds only with surfaces containing lime, clay, cement or ceramics. You apply at least three coats of 2–3 mm, smooth the last one with a steel trowel, and then polish with a stone and soap. It is not a technique for beginners.

We describe the whole process in our guide tadelakt: a bathroom without tiles.

See how lime works →

Paddle against a lime-painted wall in a streak of sunlight — play of light on a matt surface

MATTER

A wall that breathes with the house.

Natural lime has been at work on walls for thousands of years. Applied in layers, by hand — every stroke stays in the texture. The surface lives with the light and ages with dignity.

The art of applying
pH > 12natural biocide
no plastic filmthe wall breathes

QUESTIONS

Before you order

How is lime paint different from ordinary latex paint?

Lime paint is mineral and vapour-permeable — it “breathes” instead of forming a sealed film. It gives a soft, matt effect with natural tonal transitions that you cannot achieve with latex paint.

On which surfaces can I use lime paints and plasters?

Best on mineral surfaces compatible with a lime binder: lime and cement-lime plasters, concrete, primed plasterboard. Before application, the wall is thoroughly dampened with water.

Do not use primers under lime paints without consulting us — they can seal the surface. Under decorative plasters on incompatible surfaces, a bonding primer is used. Tadelakt bonds only with surfaces containing lime, clay, cement or ceramics. A wall previously painted with latex paint needs preparation — call us and we will advise.

How much product do I need per square metre?

Lime paints and washes (Muro Sano, Nebbia) — as a guide, 4–5 m² per 1 kg per coat on a smooth surface; on coarse-grained plasters 1.5–2 m² per 1 kg. Two coats are usually applied.

Base plasters are calculated by layer thickness. Each 1 mm of thickness per 1 m² takes about 0.7–1 kg of product, and plaster cannot be applied thinner than its grain. Hence the approximate consumption per coat: Visco Reddens (4 mm) 2.8–4 kg/m², Calcis (2.5 mm) 1.75–2.5 kg/m², Finitura (0.8 mm) 0.6–0.8 kg/m².

Coloseum and Rebus decorative plasters: 8 kg for about 5 m², 25 kg for about 20 m², plus soap — 1 l and 5 l respectively.

Tadelakt in the wet zone, in the full layer system: 4.5–5 kg/m².

These are ranges, not guarantees — actual consumption depends on the absorbency of the surface and the application technique. For larger areas, call +48 605 642 777 and we will work it out together.

How long does a lime coating take to dry?

Lime paints and washes: the surface dries in a few hours; the next coat is usually applied after 4–6 hours.

Decorative plasters are sealed with soap once they are touch-dry — no later than 24 hours after application.

Full hardening (carbonation of the lime) happens gradually over several days to a couple of weeks.

Are the products safe for bedrooms and children's rooms?

Yes. They are based on natural lime, have a low content of volatile organic compounds and are suitable for living spaces. The natural pH of lime limits the growth of mould and bacteria.

When will my order arrive?

We do not keep stock on the shelf — every batch is prepared after the order is placed, so we ship within 14 working days. Transit time comes on top of that: an InPost parcel locker usually takes 1–2 working days, a courier about the same.

If you need it by a particular date, call +48 605 642 777 and we will see what can be done.

Can I return a product?

Yes. As a consumer you have 14 days from receiving the order to withdraw from the contract without giving a reason. The product must be unused and in its original, unopened packaging.

Will I receive a VAT invoice?

Yes. Enter your invoice details at checkout (including the VAT number for companies) and we will send the invoice to your email address.