Lime base plasters
A wall that lives. Breathes. Changes with the light.
— Decoraton Colour
-
Made to orderCalcis – lime base plaster
Regular price 159,00 złRegular priceSale price 159,00 złMade to order -
Made to orderFinitura – lime base plaster
Regular price 159,00 złRegular priceSale price 159,00 złMade to order -
Made to orderVisco Reddens - lime base plaster
Regular price 159,00 złRegular priceSale price 159,00 złMade to order
Lime base plaster: three layers that work together with the wall
Visco Reddens, Calcis and Finitura form a system of lime plasters for interiors and exteriors. Each can be used on its own, but they work best together — as a three-coat plaster. Counting from the wall: scratch coat, base coat, finish coat.
Which base plaster should I choose?
- Visco Reddens — scratch coat, grain size 1–4 mm. The first and most porous layer, applied directly to the wall.
- Calcis — base coat, 0.1–2.5 mm. It levels the wall and prepares it for finishing; a good substrate for decorative plasters and lime paints.
- Finitura — finish coat, 0.1–0.8 mm. The finest grain and the highest lime content. It can be the final layer or a substrate for lime paint and decorative plasters.
Why a three-coat plaster?
The grain size of the aggregate determines the size of the capillaries: they are largest next to the wall and smallest in the outer layer. Thanks to capillary action, the whole system works like a natural suction pump that draws moisture out of the walls. The first layer stores salts, while the following layers — richer in lime — are more flexible and compensate for stresses. This protects the plaster against cracking. A single layer limits these benefits, but still lets water vapour escape to the outside.
How much lime plaster do I need?
Plaster cannot be applied thinner than its grain, and each millimetre of thickness takes about 0.7–1 kg per m². As a guide, for one layer:
- Visco Reddens (up to 4 mm): 2.8–4 kg/m², a 25 kg bag covers approx. 6–9 m²
- Calcis (up to 2.5 mm): 1.75–2.5 kg/m², 25 kg covers approx. 10–14 m²
- Finitura (up to 0.8 mm): 0.6–0.8 kg/m², 25 kg covers approx. 30–40 m²
These are ranges, not a guarantee — consumption depends on how even and absorbent the wall is. For larger areas, give us a call and we will calculate it together.
Where can lime plaster be used?
Inside and outside the building, in dry and damp rooms: in living rooms, bathrooms, kitchens, basements and on façades. Lime plaster regulates humidity and inhibits mould growth. An important rule: the compressive strength of the scratch coat should not exceed that of the substrate — the plaster should work with the wall, not against it.
How long does lime plaster last?
Lime plaster has a service life of 60–90 years. Along the way, small micro-cracks seal themselves. When the plaster can no longer store contaminants, it is removed down to the substrate and applied again.
Frequently asked questions
Can base plaster be the final finish of a wall?
Yes — Finitura can be the final layer. You can also paint it with lime paint or apply a decorative plaster on top of it.
Do I have to apply all three layers?
No, but three layers give the best result. A single layer still lets water vapour escape, it just offers less protection against salts and cracking.
Have a question? Call us: +48 605 642 777 — advice is free.


