MATTER
A wall that breathes with the house.
Natural lime has been at work on walls for thousands of years. Applied in layers, by hand — every stroke stays in the texture. The surface lives with the light and ages with dignity.
QUESTIONS
Before you order
How is lime paint different from ordinary latex paint?
Lime paint is mineral and vapour-permeable — it “breathes” instead of forming a sealed film. It gives a soft, matt effect with natural tonal transitions that you cannot achieve with latex paint.
On which surfaces can I use lime paints and plasters?
Best on mineral surfaces compatible with a lime binder: lime and cement-lime plasters, concrete, primed plasterboard. Before application, the wall is thoroughly dampened with water.
Do not use primers under lime paints without consulting us — they can seal the surface. Under decorative plasters on incompatible surfaces, a bonding primer is used. Tadelakt bonds only with surfaces containing lime, clay, cement or ceramics. A wall previously painted with latex paint needs preparation — call us and we will advise.
How much product do I need per square metre?
Lime paints and washes (Muro Sano, Nebbia) — as a guide, 4–5 m² per 1 kg per coat on a smooth surface; on coarse-grained plasters 1.5–2 m² per 1 kg. Two coats are usually applied.
Base plasters are calculated by layer thickness. Each 1 mm of thickness per 1 m² takes about 0.7–1 kg of product, and plaster cannot be applied thinner than its grain. Hence the approximate consumption per coat: Visco Reddens (4 mm) 2.8–4 kg/m², Calcis (2.5 mm) 1.75–2.5 kg/m², Finitura (0.8 mm) 0.6–0.8 kg/m².
Coloseum and Rebus decorative plasters: 8 kg for about 5 m², 25 kg for about 20 m², plus soap — 1 l and 5 l respectively.
Tadelakt in the wet zone, in the full layer system: 4.5–5 kg/m².
These are ranges, not guarantees — actual consumption depends on the absorbency of the surface and the application technique. For larger areas, call +48 605 642 777 and we will work it out together.
How long does a lime coating take to dry?
Lime paints and washes: the surface dries in a few hours; the next coat is usually applied after 4–6 hours.
Decorative plasters are sealed with soap once they are touch-dry — no later than 24 hours after application.
Full hardening (carbonation of the lime) happens gradually over several days to a couple of weeks.
Are the products safe for bedrooms and children's rooms?
Yes. They are based on natural lime, have a low content of volatile organic compounds and are suitable for living spaces. The natural pH of lime limits the growth of mould and bacteria.
When will my order arrive?
We do not keep stock on the shelf — every batch is prepared after the order is placed, so we ship within 14 working days. Transit time comes on top of that: an InPost parcel locker usually takes 1–2 working days, a courier about the same.
If you need it by a particular date, call +48 605 642 777 and we will see what can be done.
Can I return a product?
Yes. As a consumer you have 14 days from receiving the order to withdraw from the contract without giving a reason. The product must be unused and in its original, unopened packaging.
Will I receive a VAT invoice?
Yes. Enter your invoice details at checkout (including the VAT number for companies) and we will send the invoice to your email address.