Skip to product information
1 of 3

Decoraton

Soap – various options

Regular price 45,00 zł
Regular price Sale price 45,00 zł
Sale Sold out
Taxes included. Shipping calculated at checkout.
Made to order — ships within 14 working daysCreated especially for you. Every batch is prepared after the order is placed — fresh, not off the shelf.
Packaging

Natural soap for sealing and caring for lime surfaces — plasters, paints and tadelakt. We make it from olive oil and potassium hydroxide, without chemicals.

How it works

The stearic acid in the soap binds with lime to form lime soap — a layer with strong hydrophobic properties. It is a method known for centuries, used in traditional hammams and Moroccan bathrooms.

The most important difference from varnishes: soap does not change the breathability of the plaster. The wall is sealed but still lets water vapour through.

When to apply — and why timing matters

Soap reacts with fresh, not yet carbonated plaster. That is why the moment of application determines its effectiveness:

  • Apply when the plaster is touch-dry
  • No later than 24 hours after applying the plaster — after that, the reaction with lime is very weak and may be ineffective

How to apply on decorative plasters

  • With a brush, in 3–4 coats
  • Each coat a dozen to several dozen minutes after the previous one has clearly dried
  • The soap may run during application — smooth out drips as you go, without worrying about them too much

How to apply with tadelakt

With tadelakt, the soap works together with polishing. You apply the first coat while smoothing with a stone, leave the wall overnight, and the next day you continue applying soap and polish again — until glossy. Over the following few days it is worth rubbing in a thin layer by hand or with a brush.

How much you need

As a guide: 1 l for about 5 m², 5 l for about 20 m² of decorative plaster surface.

Any doubts?

Call us: +48 605 642 777. Phone advice is free.

Delivery and returns

Every batch is prepared after the order is placed, so we ship within 14 working days. We send orders via InPost parcel locker or courier — you pick the method in the cart and see the cost before payment.

You have 14 days to withdraw from the contract without giving a reason (product unused, in its original packaging). The VAT invoice will be issued to the details given with the order.

How to apply

Apply to fresh plaster once it is touch-dry — no later than 24 hours after applying it. On decorative plasters: by brush, in 3–4 coats. With tadelakt, the soap works together with polishing with a stone, and over the following few days it is worth rubbing in a thin layer.

See how lime works →

Paddle against a lime-painted wall in a streak of sunlight — play of light on a matt surface

MATTER

A wall that breathes with the house.

Natural lime has been at work on walls for thousands of years. Applied in layers, by hand — every stroke stays in the texture. The surface lives with the light and ages with dignity.

The art of applying
no plastic filmthe wall breathes

QUESTIONS

Before you order

How is lime paint different from ordinary latex paint?

Lime paint is mineral and vapour-permeable — it “breathes” instead of forming a sealed film. It gives a soft, matt effect with natural tonal transitions that you cannot achieve with latex paint.

On which surfaces can I use lime paints and plasters?

Best on mineral surfaces compatible with a lime binder: lime and cement-lime plasters, concrete, primed plasterboard. Before application, the wall is thoroughly dampened with water.

Do not use primers under lime paints without consulting us — they can seal the surface. Under decorative plasters on incompatible surfaces, a bonding primer is used. Tadelakt bonds only with surfaces containing lime, clay, cement or ceramics. A wall previously painted with latex paint needs preparation — call us and we will advise.

How much product do I need per square metre?

Lime paints and washes (Muro Sano, Nebbia) — as a guide, 4–5 m² per 1 kg per coat on a smooth surface; on coarse-grained plasters 1.5–2 m² per 1 kg. Two coats are usually applied.

Base plasters are calculated by layer thickness. Each 1 mm of thickness per 1 m² takes about 0.7–1 kg of product, and plaster cannot be applied thinner than its grain. Hence the approximate consumption per coat: Visco Reddens (4 mm) 2.8–4 kg/m², Calcis (2.5 mm) 1.75–2.5 kg/m², Finitura (0.8 mm) 0.6–0.8 kg/m².

Coloseum and Rebus decorative plasters: 8 kg for about 5 m², 25 kg for about 20 m², plus soap — 1 l and 5 l respectively.

Tadelakt in the wet zone, in the full layer system: 4.5–5 kg/m².

These are ranges, not guarantees — actual consumption depends on the absorbency of the surface and the application technique. For larger areas, call +48 605 642 777 and we will work it out together.

How long does a lime coating take to dry?

Lime paints and washes: the surface dries in a few hours; the next coat is usually applied after 4–6 hours.

Decorative plasters are sealed with soap once they are touch-dry — no later than 24 hours after application.

Full hardening (carbonation of the lime) happens gradually over several days to a couple of weeks.

Are the products safe for bedrooms and children's rooms?

Yes. They are based on natural lime, have a low content of volatile organic compounds and are suitable for living spaces. The natural pH of lime limits the growth of mould and bacteria.

When will my order arrive?

We do not keep stock on the shelf — every batch is prepared after the order is placed, so we ship within 14 working days. Transit time comes on top of that: an InPost parcel locker usually takes 1–2 working days, a courier about the same.

If you need it by a particular date, call +48 605 642 777 and we will see what can be done.

Can I return a product?

Yes. As a consumer you have 14 days from receiving the order to withdraw from the contract without giving a reason. The product must be unused and in its original, unopened packaging.

Will I receive a VAT invoice?

Yes. Enter your invoice details at checkout (including the VAT number for companies) and we will send the invoice to your email address.